AUMA SG 03.3 Series, Руководство по эксплуатации

Страница: 3 / 68

3
Part-turn actuators SG 03.3 – SG 04.3
Operation instructions with AUMATIC AC 01.1
Page
15.5 General information about the menu design 19
15.5.1 LCD contrast setting 19
15.5.2 Navigation through the indications 19
15.5.3 Group
S
: Status indications 20
15.5.4 Group
M
: Menu indications 21
15.5.5 Group
D
: Diagnosis indications 24
15.6 Checking for software version 24
15.7 Fieldbus interface 24
15.8 Display indications and software parameters 25
15.8.1 Status indications 25
15.8.2 Menu indications 27
15.8.3 Diagnosis indications 48
16. Operation modes and functions of the AUMATIC 51
16.1 Operation mode OFF 51
16.2 Operation mode LOCAL 52
16.3 Operation mode REMOTE 52
16.4 Operation mode EMERGENCY 52
16.5 Operation mode SAFETY 53
16.6 Signal relays 54
16.7 Stepping mode 54
16.8 Analogue position feedback 55
16.9 Type of seating 55
16.10 Push-to-run operation or self-retaining 55
16.11 Intermediate positions 56
16.12 Monitoring functions 57
16.12.1 Motor protection (thermo monitoring) 57
16.12.2 Exceeding the max. permissible number of starts or running time per hour 57
16.12.3 Operating time monitoring 58
16.12.4 Reaction monitoring 58
16.13 Running indication (blinker) 58
16.14 Logging of operating data 58
16.15 Electronic name plate 58
16.16 Release of the local controls (option) 59
17. Faults and warnings 59
17.1 Faults 59
17.2 Warnings 59
17.3 Problems with position feedback/indication E2 (from actuator) 59
17.4 LCD badly or not readable 59
17.5 Actuator does not run 59
17.6 Actuator does only operate from Local 60
17.7 Actuator is not switched off by limit seating in direction CLOSE or OPEN 60
18. Fuses 60
19. Maintenance 61
20. Disposal and recycling 61
21. Service 61
22. Part-turn actuators SG 03.3 – SG 04.3 62
23. Spare parts list AUMATIC AC 01.1 64
24. Declaration of Conformity and Declaration of Incorporation 66
Index 67
Addresses AUMA offices and representatives 68