manualshive.com logo in svg

AUMA AC 01.2, Руководство по эксплуатации

Поделиться
Скачать
AUMA AC 01.2 Скачать руководство пользователя страница 26

5.2.3.

Terminal compartment (for mains connection): close

Figure 19: Close mains terminal compartment

[1]

Connection housing

[2]

Screws for connection housing

[3]

O-ring

[4]

Screws for socket carrier

[5]

Socket carrier

[6]

Cable gland (not included in delivery)

[7]

Blanking plug

Short-circuit due to pinching of cables!

Risk of electric shock and functional failures.

→

Carefully fit socket carrier to avoid pinching the cables.

1.

Insert the socket carrier [5] into the connection housing [1] and fasten with
screws [4].

2.

Clean sealing faces of connection housing [1] and housing.

3.

Check whether O-ring [3] is in good condition, replace if damaged.

4.

Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the O-ring and
insert it correctly.

5.

Fit connection housing [1] and fasten screws [2] evenly crosswise.

6.

Fasten cable glands and blanking plugs applying the specified torque to ensure
the required enclosure protection.

26

 SQ 05.2 – SQ 14.2 / SQR 05.2 – SQR 14.2 Control unit - electromechanical

Electrical connection

 AC 01.2 Intrusive Modbus RTU

Содержание AC 01.2

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды