- 5 -
Note: 1. When your print becomes faint, you need to replace the ribbon cartridge. Otherwise, the
print quality will be affected and the print head may be damaged.
2. To remove the old ribbon cartridge, first make sure the power is turned off, move the print
head to the left of the printer. Then pull out the ribbon nip, hold the ribbon cartridge
handle on both sides and lift it out of the printer. Install a new one as the above steps.
3. Please use the original ribbon cartridge only. Manufacturer will not honor warranty when
using unauthorized ribbon cartridge.
4. Please turn the ribbon knob in the direction of the arrow.
2.6 Installing and Dismantling the Paper Rack Holders
2.6.1 Installing the Paper Rack Holders
When installing the holder, firstly, aim the mounting slot of the holder at the corresponding
positioning shaft on the printer, then turn it upwards and make the upper mounting slot installed into
place. (As shown below)
2.6.2 Removing the Paper Rack Holders
When removing the holder, firstly, pull the rack knob upwards then press the holder downwards, the
holder will be removed. (As shown below)
Figure 2-9 Install the paper rack holder
Figure 2-8 Install the ribbon cartridge
Ribbon cartridge
Paper rack holder (right)
