- 62 -
◆
The position and size of gear hole
The gear hole of tractor paper should accord with the specification.
The positions and sizes of gear hole are shown below. The central line here refers to the line
between any two gear holes center which is in the distance of 254mm in either side of the paper.
Single-ply paper
White paper
Paper
Multi-ply paper
NCR paper
Width
127
~
406
mm
Length
≥
140
mm
Copy capability
(Max.)
7 copies (Or 6 copies), paper weight based on the standard.of 40g/ m
2
Single-ply paper: 60
～
105
g/m
2
Weight
Multi-ply paper (each sheet): 40
～
64
g/m
2
Note: See details in the multi-ply paper (NCR paper) requirement table
Single-ply paper
≤
0.08 ~ 2.0 mm
(Note 1)
Total thickness
Multi-ply paper
≤
0.12 ~ 0.52 mm
(Note 2)
Note: 1. This thickness is added by multi single-ply papers, and it is only achieved
when just printing on the upper paper. (No need to copy)
2. Refer to the requirement of the multi-ply paper (NCR paper), the mount paper
can be thicker than other plies, but we can’t guarantee the printing effect as it
is influenced by paper difference.
≥
15 mm
It depends on the top adjustment
and bottom margin.
≥
15 mm
Printable Area
Max. 345.44 mm
