- 23 -
2
RESET
Long press the
ALT + ONLIN
key, then “INITIALIZING...” is displayed on
the LCD, and then the printer restarts and initializes which will clean the
printing buffer. (Each time 132K)
Note: It is workable both in Online and Offline modes.
3
HIGH SPEED
1. Press
HIGH SPEED
key once can display the current speed on the
LCD, press this key one more time will change the speed in turn, and
lossen the key to choose the shown print speed. As shown below.
2. In the Menu Setup Mode, press
HIGH SPEED
to exit the submenu.
4
FORMAT
1.
Press
FORMAT
key once can display the current
FORMAT
state on
the LCD, press this key one more time can modify the
FORMAT
states in turn. The display is as follows:
2.
In the Menu Setup Mode, press this key to exit Menu Setup Mode.
5
SET UP
Press
ALT
and
FORMAT
keys at the same time to enter
Menu Setup
Mode
.
Note: Both Online and Offline are OK.
6
ENTER
In the
Menu Setup Mode, press
ENTER
key to confirm and save the
settings.
7
ALT
The following functions are executed by pressing the corresponding key
while you press the ALT key.
ALT
+
MICRO
LF
→
MICRO LF
ALT
+
MICRO
RLF
→
MICRO RLF
ALT
+
SET UP
→
MENU SETUP
ALT
+
ONLINE
→
RESET (Initialize the printer, clean the printing buffer.
Note: It should be long pressed.
)
8
EJECT/LOAD
1. In tractor paper mode, if there is no paper in the printing home
position, press this
EJECT/LOAD
key to feed paper; If there is paper
in the printing home position, press this key can eject the paper to
parking position.
2. In manual paper feed mode, if there is no paper in the printing home
position, press this
EJECT/LOAD
key, the printer would make out an
alarm of paper out; If there is paper in the printing home position,
press this key can eject the paper.
3. In the Menu Setup Mode, press
TEAR OFF
key to enter submenu.
ENTER
ONLIN
ALT
+
RESET
SPEED
RESET
FORMAT 1
FORMAT 2
FORMAT 3
FORMAT 4
FORMAT 5
FORMAT 6
FORMAT
SET UP
ENTER
ALT
ENTER
ALT
+
ENTER
ALT
FORMAT
SET UP
EJECT/LOAD
HIGH 1
HIGH 2
NORMAL
LQ
HIGH 3