- 4 -
Caution:
Never remove the print head when printer is on, or else the printer may get damaged.
Besides, do not touch the print head if the printer has just been used as the print
head may be hot.
3. Turn the ribbon feed knob in the direction of the arrow to remove any slack from the ribbon so it is
easier to install. (As shown below)
4. Hold the carriage handle and insert the ribbon cartridge into the mounting slot, then push it forwards
until it locks into place. (As shown below)
5. Aim the two round holes on the ribbon nip at the two projections of the carriage, and then press
them into place. (As shown below)
6. Turn the ribbon feed knob in the direction of the arrow to remove any slack from the ribbon again, so
that it is easier to install..
7. After installing the ribbon cartridge (as shown below), please close the front cover.
Figure 2-5 Ribbon cartridge
Figure 2-6 Installing the ribbon cartridge
Figure 2-7 Install the ribbon nip to the carriage
Ribbon cartridge
Carriage handle
Ribbon knob
Ribbon nip
Ribbon core
Carriage handles
Projection
Round hole
Round hole
Projection
