- 8 -
Note: Before connecting the parallel interface or the serial interface, please make sure the
power of the printer is shut down. Must after tightening the cable may you turn on the
power, or it will damage the printer.
2.9.1 Connecting to the Parallel Interface
1. Turn off both the computer and the printer. Plug the parallel interface cable securely into the
printer's parallel interface. Squeeze the wire clips together until they lock in place on both sides of
the connector. As shown in Figure 2-15.
2. Plug the other end of the cable into the computer's parallel interface; then tighten the screws on
both sides of the connector, make sure it is tightened to the interface.
2.9.2 Connecting to the USB Interface
1. Plug the USB cable A end (flat shape) into the computer's USB interface. As shown in Figure 2-16.
2. Plug the USB cable B end (square shape) into the printer's USB interface.
Note: Don't impact the plug after connecting to the USB interface cable.
2.9.3 Connecting to the Ethernet Interface
Plug the RJ-45 crystal end of the Ethernet cable into the printer, and plug the other plug into the LAN.
As shown in Figure 2-17.
Note: The details of Ethernet interface printer’s net setting please refer to the
Owner’s Manual
.
Figure 2-16 Connect to the USB interface
Figure
2-17
Connect to Ethernet interface
Figure 2-15 Connect to the parallel interface
Parallel interface
Parallel interface cable
Wire clips
USB interface cable
USB interface
Ethernet interface cable
Ethernet interface
