Exit menus
With the
home key
you can close an open menu. Incorrectly exi-
ted settings are not saved.
Open menus
With the
menu key
, you can open the main menu
which contains
the following menus:
In the
functions
menu, you can activate/deactivate or execute
functions in the PBX and the telephone (for example, Call forwar-
ding and the telephone lock).
The
information
menu is only used to display information
(for example, versions, accumulated charges and the status of
certain important functions/settings). No changes can be made
here.
In the
define keys
menu, you can assign functions on the PBX
and the telephone to programmable function keys (for example,
Call forwarding and Speed dialling).
In the
settings
menu, you can configure the telephone.
In the
diagnosis
menu, you can carry out the diagnosis of ISDN
lines and services (e.g. line check (BERT)).
Back, action finished
Pressing the
back key
takes you back to the menu opened pre-
viously and finishes the current action.
Mute
Press the
microphone key
to switch the microphone on/off
during a call.
The LED of the key blinks red as soon as the microphone is swit-
ched off.
Hands-free calling and
loudspeaker listening
Press the
loudspeaker key
to initiate calls without picking up the
receiver (hands-free calling) and to terminate them.
Press the
loudspeaker key
to activate loudspeaker listening
during a call which has been set up. To activate hands-free cal-
ling instead, you need to hold down the key for 2 seconds (sub-
sequently, you can hang up the receiver).
The LED of the key blinks red as soon as loudspeaker listening
is switched on.
The LED of the key blinks red as soon as hands-free calling is
switched on.
Adjust the volume
Press the
plus/minus keys
to increase/decrease the volume of
the bell, the receiver, or the loudspeaker – depending on the cur-
rent operating mode.
Hands-free calling,
headset calls
Press the
hook key
to initiate calls without picking up the receiver
(hands-free calling) and to terminate them. With headset opera-
tion, you can initiate headset calls and terminate them.
Open contacts
With the
contact/telephone book key
, you can open the cont-
acts of the telephone.
To dial a telephone number, scroll to the required entry (contact)
and pick up the receiver.
Open the caller list and
the message list of the
voice mailbox
With the
message key
, you can open the caller list and the mes-
sage list of the voice mailbox.
To dial a telephone number (caller list) or to listen to recordings,
scroll to the required entry and pick up the receiver.
The LED of the key indicates new calls (blinking LED) or calls you
have already seen (constantly lit LED).
Open the redial list
Press the
redial key
to open the redial list, which contains the
telephone numbers dialled last.
To dial a telephone number, scroll to the required entry and pick
up the receiver.
Initiate a query call
Press the
query key
to initiate a query call or transfer a call
during a conversation.
