USER’S MANUAL / bit Tune /
59
EMS
PC ANALYZER
LINE NOISE
POWER
SEGNAL INPUT
SELECT
RIGHT
VOLUME
MONITOR
47 OHM
SPK SYM
NO LOAD
LEFT
PRE IN
BNC
SPK IN
PROBE
MIN •
• MAX
LOAD SIMULATOR
SPEAKER IN
PHONE
REM
IN
REM
OUT
12 V
KEY
SW
INPUTS
MUTE IN
FL FR RR
RL
AD Link
AC Link
LEVEL
LEVEL
DISCONNECT
THE SPEAKER
SIGNAL
INPUTS
AUX
INPUTS
PRE
INPUTS
DON’T CONNECT PRE IN
CABLE INPUTS WHEN USING
SPK IN INPUTS
Fig. 2
1.
Connect the bit Tune to the Audison bit processor, as shown in fig. 1 or 2 (see points A and B).
- Disconnect all speaker wires from the system’s speakers.
- Set the sensitivity level of the amplifiers to the minimum (5 V RMS).
- Turn the
bit Tune
on and connect the USB cable to the PC.
- Set the function switch of the
bit Tune
to
PC ANALYZER
.
- Set the
SIGNAL INPUT SELECT
switch on
SPEAKER IN
.
- Turn on the Audison bit processor and connect the USB cable to the
bit Tune
.
- Start the
bit Tune
software by clicking the icon on the PC desktop created by the installation and launch the
software in
bit Tune + Processor mode
.
A. bit Ten:
Connect the
AUX Left
and
Right
inputs of the
bit Ten
to the
Pre Out Left
and
Right
outputs of the
bit Tune
, and set
the level of the
AUX
inputs to position 1.
B. bit One:
Connect the
AUX1 Left
and
Right
inputs of the
bit Ten
to the
Pre Out Left
and
Right
outputs of the
bit Tune.
7
Содержание bit Tune
Страница 1: ...USER S MANUAL rev 2 2 audison com ...
