background image

15

ANSWERING SYSTEM                                                  AUDIOLINE FF893

REMOTE TURN ON THE SYSTEM

If you forget to switch your system on before leaving home, simply do the following:
 

#

Call your telephone number, the FF893 will answer after 12 rings.

#

Enter your 3-digit security code after the beep (you have 20 seconds).

#

Enter required command/s after the second beep.

NOTE:

 If no command is entered within 20 seconds of entering the security code

the system will drop the line. 

MEMORY FULL

If the recording memory is full, your answering system will playback OGM2 when
receiving calls. After hearing OGM2, there will be a 10 second time period for entry
of the security code before the system drops the line.
When the memory is full, all the recording functions Incoming Message, OGM1,
OGM2, MEMO and 2 Way are not available.

LED INDICATIONS FOR THE ANSWERING SYSTEM

STATUS

POWER/LOW BAT LED

ANSWER ON/OFF
MESSAGE LED

Self test & initialisation

Flash slowly

Flash slowly

Answer ON

ON (back up battery OK) 

ON (no message)

Answer OFF

ON (back up battery OK)

OFF

System busy

ON (back up battery OK)

Flash slowly

No message

ON (back up battery OK)

ON

New message received

ON (back up battery OK)

Flash with message count

Played message only

ON (back up battery OK)

ON

Memory full

Flash fast

Flash fast

B/up Batt low/not installed

Flash slowly

ON (no message)

Содержание FF893
























Отзывы: