AUDIOLINE FF893, Руководство пользователя

Страница: 7 / 23

5
INSTALLATION AUDIOLINE FF893
HANDSET BATTERY INSTALLATION
To install or change the battery do the following:
#
Remove the battery cover by applying gentle pressure to the rear of the handset and
slide downwards.
#
Insert the battery (supplied),
observing correct polarity
(ensure red wire is on left
hand side) and replace the battery cover.
FIT the aerial to the handset.
#
Place handset onto base unit (face up or down) and
charge for 14 hours
. The
telephone should not be used during this time.
#
Connect the telephone line cord to the rear of the base unit and plug into the
telephone network socket
.
#
Your FF893 is now ready for use.
HANDSET BATTERY CARE
For maximum life from your battery, do the following:
#
After initial charging the base unit must remain connected to the mains power.
#
If the telephone is not to be used for a substantial period of time, i.e. holidays,
disconnect the mains power adaptor.
#
When power is reconnected you must recharge the handset for 14 hours.
#
To maintain optimum condition, discharge the batteries fully every 4 months, and
then recharge for 14 hours.
#
The batteries will need replacing if there are signs of leakage, or the batteries will
not hold a charge for more than two hours.
NOTE:
From new, the batteries after they have been installed, must be charged for 14
hours without interruption.
Use only AUDIOLINE approved cadmium-free Nickel Metal Hydride (NiMH)
rechargeable batteries.
The guarantee will be invalid if any problems arise as a
result of the use of an incorrectly specified battery.