AUDIOLINE FF893, Руководство пользователя

Страница: 6 / 23

4
AUDIOLINE FF893 INSTALLATION
POSITIONING THE BASE UNIT
It is essential for best performance of the telephone system that the base unit be
positioned properly in your home or office.
Place the base unit close to a telephone network socket and a 230/240 volt mains
outlet.
If the range of operation between the handset and the base unit is not satisfactory, try
repositioning the base unit, but:
#
Do not position the unit in direct sunlight, damp or high humidity locations
.
#
Do not position the unit close to: electrical equipment such as TV’s, computers,
fridges, etc., or close to radiators, metal pipes or window frames.
BASE INSTALLATION
Connect the power supply cord to the rear of the base unit and plug into the 230/240
volt mains outlet.
You will hear “Please wait”and the answer ON/OFF and power LEDs will flash for
around 25 seconds, then a confirmation tone will be heard.
FITTING BACK-UP BATTERIES IN BASE UNIT
It is essential to fit four “AAA” size 1.5v Alkaline batteries (not rechargeable type) to
ensure your messages are not lost during a mains power failure. Note, batteries not
included. To install or replace batteries do the following:
#
Disconnect the line cord from the telephone.
#
Locate battery compartment on underside of base unit.
#
Insert blunt instrument into small square hole and prise cover gently open.
#
Insert batteries observing correct polarity.
#
Replace battery cover.
#
Reconnect telephone cord.
NOTE:
The POWER/LOW BAT indicator will flash continuously if back-up
batteries are not fitted or are discharged.