Phone 425-775-8461 • www.audiocontrol.com
®
1
HDMI Signals
Your Concert AVR-1 is equipped with five discrete HDMI inputs and dual
assignable HDMI outputs. All the HDMI outputs are assignable to various
display devices, the signals on both will be the same as HDMI can only have
one processed video path.
Output 1 -
Connect this to the display device located in your main zone or
theater.
Output 2 -
Connect this to the display device located in your secondary zone.
Additionally, standard HDMI signals are only meant to be sent 20 to
30 feet before signal degradation or even dropout occurs. Therefore
we recommend you utilize a HDMI signal extension system like the
AudioControl BVHD-10, especially when using high bandwidth
signals like 1080p from Blu-Ray players or cable boxes.
IR (Infra-red) Remote Control Connections
We have equipped the Concert AVR-1 with a number Infrared (IR) inputs plus
an output to allow for maximum control flexibility with standard IR remote
controls (sold separately). This allows you to place the infrared receiver where
it can “see” the signal from the remote control when the equipment may be
hidden. The IR connections are designed for “modulated” signals and wired
for stereo or mono 3.5mm jacks with “Tip” being the modulated signal and
“Sleeve” being ground. The signals are compatible with third-party receivers
such as a Xantech No. 291-10.
Zone 1 IR -
This is ideal for when the front panel of the Concert AVR-1 is
hidden away in some dark closet or equipment rack. To prevent the possibil-
ity of receiving multiple commands, when you connect an IR receiver to this
input, it will disable the front panel IR receiver.
Zone 2 IR -
Allows for control of source and volume functions of Zone 2
Zone 3 IR -
Allows for control of source and volume functions of Zone 3. You
will want to note that Zone 3 will always share audio sources with Zone 2.
IR Output -
This output is an electrical combination of Zone 1, Zone 2, and
Zone 3 IR input signals and can be used as an IR repeater.
12V Trigger Connections
There are three stereo mini-jack 12 volt trigger outputs on the rear panel of the
Concert AVR-1 which are used to remotely control such things as the power
amplifier turn-on, projector power, screen automation. The jacks are designed
for 3.5mm mono connectors with “Tip” being the trigger output and “Sleeve”
being ground. Each jack is capable of outputting a 12V 70 mA switching signal.
s
eT
-u
p
& C
onfIguraTIon
