Phone 425-775-8461 • www.audiocontrol.com
®
1
g
uIded
T
our
of
THe
C
onCereT
aVr-1
NETWORKED AND USB AUDIO INPUTS -
Your Concert AVR-1 has the ability to accept audio
files via an Ethernet connection or from a USB mass
storage device. This usage requires some expertise
in the area of computer networks so please refer to
page 33 or your AudioControl dealer for the proper
applications.
12 VOLT TRIGGER OUTPUTS -
These three
outputs provide a +12 volt signal to control the pow-
er amplifiers, source units, video projector, screens
and curtains in the theater. The Main Trigger output
is active whenever the Concert AVR-1 is turned on;
the Video Trigger 2 is active whenever a video source
is selected.
IR (INFRARED) INPUTS AND OUTPUTS -
These jacks enable use of external IR sensors and
emitters for installations where it is not desirable (or
practical) to use the front panel IR.
MAIN AUDIO OUTPUTS -
These RCA
outputs can feed external power amplifier(s), should
you choose to not use the amplifier built-in to your
Concert AVR-1. (Our customers tell us that our
AudioControl Savoy 7-channel amplifier works
great in these situations). Additionally the Concert
AVR-1 has three subwoofer outputs that can feed
signals to active powered subwoofers.
HDMI INPUTS & OUTPUTS -
These inputs
allow the Concert AVR-1 to accept digital audio and
video signals from source units equipped with HDMI
(High Definition Multimedia Interface) outputs.
Make sure your HDMI cables are properly inserted
into these connectors and that there no sharp “pulls”
on the cable that may prevent your connectors from
making a complete connection.
COMPOSITE AND S-VIDEO INPUTS &
OUTPUTS -
These are for the video inputs and
outputs from your source units. If you are planning
on using the second zone video outputs, you should
ALWAYS connect a Composite video input from
each source.
COMPONENT VIDEO OUTPUT -
When not
using the HDMI outputs connect these high quality
video outputs to your main video display device (i.e.
Projector, CRT, LCD, etc.) You will be pleased to
know that the Concert AVR-1 will convert Compo-
nent, Composite and S-video signals to HDMI.
HEADPHONE CONNECTOR -
This jack ac-
cepts an 1/8” input for using headphones with imped-
ance ratings of 32 to 600 ohms. This jack is always
active and
will not turn off the audio
in the main
zones when a connector is inserted which allows it to
be used for remote installations. The main zones can
be muted via RS-232 serial commands if necessary.
AUx INPUT -
This Aux input is used in conjunction
with the auto-setup microphone. Additionally it can also
accept either analog or optical digital signals.
