Phone 425-775-8461 • www.audiocontrol.com
®
2
Dolby Prologic II Music Mode Settings
These setting apply to all two-channel inputs when PLII or PLIIx Music
mode is selected.
Dimension -
Adjusts the depth of the front/rear sound stage. For
normal listening this should be set to +3. Setting options are –3 to
+3 with default setting being “0”.
Center Width -
Determines how strongly the Pro Logic II decoder
processing creates the center channel image. Normally this signal
is fed only to the center channel speaker output, but if the center
speaker is set to “None” in the speaker setup, a phantom center
channel is created using the front left and right channels. Normally
this setting is left at +3.
Panorama -
When the Panorama Mode is enabled, the front center
image is extended to include the rear surround speakers. This pro-
vides a more enveloping wrap-around effect.
Digital Output Frequency -
Sets the sampling frequency of the audio Ana-
logue-to-Digital converter. Settings options are 44.1/ 48 /96 kHz. Default is
96 kHz
Volume Adjustment -
Allows you to set the step size for the volume con-
trol. Options are “Normal” (1 dB steps) or “Fine (.5 dB steps).
Maximum Volume -
Limits the highest volume that the Concert AVR-1
will play. This is useful if you have speakers or amplifiers with limited power
handling abilities.
Max On Volume -
This is the highest volume that the Concert AVR-1
will play when it is first switched on first turned. This prevents the Concert
AVR-1 from being turned on at shock volume levels from the last time you
were watching a good movie.
Auto Setup
Your Concert AVR-1 is equipped with an Auto Setup feature that assists in
setting all of the essential speaker settings for your system, including which
speakers are present, types of speakers, crossover settings for the subwoofer,
sound level and distance compensation. It will also calculate basic room
equalization filters to offset frequency resonances caused by acoustics and
speaker placement. While there is no substitution for proper acoustical
treatments, speaker placement and theater calibration, the Auto Setup
Mode is useful for maximizing the acoustical performance of many theaters.
n
aVIgaTIng
THe
s
eTup
M
enus
INSTALL TIP
*
