Phone 425-775-8461 • www.audiocontrol.com
®
2
Output Switching:
The HDMI outputs of the Concert AVR-1 are
completely assignable to match up with switching applications of the
theater system.
Auto-Priority Out 1/Out 2:
This input senses which display
device is operating and gives priority to the selected HDMI out-
put. If both HDMI outputs are being used, priority is given to the
device selected in this menu.
Output 1 or Output 2:
Enables only selected output to operate.
Output 1 & 2:
This setting allows both HDMI outputs to oper-
ate simultaneously. In this mode the maximum resolution for
both displays will be limited to the resolution of the lowest display
device.
Output 1 Resolution:
Selects the output resolution for HDMI Out-
put #1 with the options being a list of the available display devices or
“Preferred”. In the Preferred mode, this output reflects the highest
preferred resolution of the display device. This setting is only effec-
tive if Output 1 is the only active HDMI output.
Output 1 Frame Rate:
This setting controls the frame rate output of
HDMI Output 1 with this setting only being active if OUT 1 is the
only selected HDMI output.
Lipsync 1 (Information Only):
When this feature is supported by
the display device, this setting displays how much lip sync is applied
to HDMI Output 1.
Output 2 Resolution:
Selects the output resolution for HDMI
Output #2 with the options being available display devices or “Pre-
ferred”. In the Preferred mode, this output reflects the highest pre-
ferred resolution of the display device. This setting is only effective if
Output 2 is the only active HDMI output.
Output 2 Frame Rate:
This setting controls the frame rate output of
HDMI Output 2 with this setting only being active if OUT 2 is the
only selected HDMI output.
Lipsync 2 (Information Only):
When this feature is supported by
the display device, this setting displays how much lip sync is applied
to HDMI Output 2.
n
aVIgaTIng
THe
s
eT
-u
p
M
enus
