AudioCodes Mediant 4000B SBC, Руководство по установке оборудования

Страница: 40 / 60

Hardware Installation Manual 40 Document #: LTRT-41749
Mediant 4000B SBC
The following example shows an Ethernet Group comprised of ports 5 and 6, where Port 5
is connected to the main network ("LAN #1") and Port 6 to the redundant network ("LAN
#2"). Upon connectivity failure with LAN #1 through Port 5, the device connects to the
redundant LAN #2 through Port 6.
Figure 5-3: Cabling for 1+1 Ethernet-Port Redundancy (Example)
5.1.2 Deployment of Two Devices for High Availability
The device supports 1+1 high availability, whereby two devices are deployed and
connected to the same broadcast domain/s. In such a setup, the same Ethernet port-pair
redundancy setup is done for each device. For example, if port-pair 5 and 6 are used for
Device "A", then Device "B" must also use port-pair 5 and 6, as shown in the figure below:
Figure 5-4: Cabling for High Availability (Example)
In High Availability, the two devices interconnect through their Maintenance interfaces,
using the same Ethernet Port Group.
Note: For possible connections (including Tx / Rx settings) between the HA devices,
refer to the User's Manual .