AudioCodes Mediant 4000B SBC, Руководство по установке оборудования

Страница: 52 / 60

Hardware Installation Manual 52 Document #: LTRT-41749
Mediant 4000B SBC
6.3 Installing the MPM Modules
The procedure below describes how to install an MPM module into the chassis. Each MPM
module occupies two standard AMC slots. Therefore, before installing an MPM module,
you need to remove the blank AMC modules covering the slots.
Warning: Power off the device before installing the MPM.
Avertissement: Mettez l’appareil hors tension avant d’installer le MPM.
Note: The procedure below describes how to install the MPM module in Slots 1-2. Use
the same procedure for inserting MPM modules in other slots designated for MPM
modules. For module slot assignment, see Section
3.2.1 on page 17 .

To install the MPM module:
1. Remove the new MPM from its ESD shielding packet in which it was shipped.
2. Disconnect the power cord from the power sources, and then remove the power cord
from the power connections on the two Power Supply modules.
3. Remove the blank AMC-module slot covers from the slots in which you want to install
the MPM module, by gently pulling on the handle of the modules until they slide out of
the slots completely.
Figure 6-5: Extracting Blank AMC Modules (Top View)