AudioCodes Mediant 4000B SBC, Руководство по установке оборудования

Страница: 19 / 60

Session Border Controllers 19 Mediant 4000B SBC
Hardware Installation Manual 3. Physical Description
Table 3-3: SBC CPU Module Ports Description
Item # Label Description
1 Reset pinhole button:

To reset the device, press the button for at least 1 second but no
longer than 10 seconds.

To reset the device to factory defaults, press the button for at least
12 seconds but no longer than 25 seconds.
2 IOIO RS-232 port for serial communication with a computer.
3 - Pinhole button (reserved for future use).
4 - Handle of module for installing and removing the module.
5 - Eight 1000Base-T Gigabit Ethernet ports for connecting to the IP
network. The Ethernet ports operate in pairs, where one port is active
and the other standby, providing 1+1 Ethernet redundancy. The ports
support half- and full-duplex modes, auto-negotiation, straight-through
and crossover cable detection.
3.2.2.2 LED Description
The SBC CPU module provides LEDs for indicating various operating status, as described
in the table below.
Figure 3-5: SBC CPU Module LEDs
Table 3-4: SBC CPU Module LEDs Description
Item # LED Color State Description
1 Green
On Module in service.
- Off Module out of service.
2 - Off During booting up state.
Red On Booting up phase / fault detected in module.
Green On Normal operation.
3 - Off During booting up state.
Green On Application running in Standalone state.
Flashing Application running in High Availability (HA)
Active state.