AudioCodes Media Pack MP-112, Руководство пользователя

Страница: 328 / 486

SIP User's Manual 328 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
Guard Time Between Calls Defines the time interval (in seconds) after a call has ended and a new
call can be accepted for IP-to-Tel (FXO) calls.
The valid range is 0 to 10. The default value is 1.
[GuardTimeBetweenCalls]
Notes:

Occasionally, after a call ends and on-hook is applied, a delay is
required before placing a new call (and performing off-hook). This is
necessary to prevent incorrect hook-flash detection or other glare
phenomena.

This parameter is applicable only to FXO interfaces.
6.14 Number Manipulation and Routing Parameters
This subsection describes the device's number manipulation and routing parameters.
6.14.1 Routing Parameters
The routing parameters are described in the table below.
Table 6-52: Routing Parameters
Parameter Description
Endpoint Phone Number Table
Endpoint Phone Number Table
This
[TrunkGroup]
ini file table parameter is used to define and activate the
device's endpoints, define telephone numbers for them, and
assign them to Hunt
[TrunkGroup]
FORMAT TrunkGroup_
Group IDs. The format of this parameter is
shown below:
Index = TrunkGroup_ TrunkGroupNum ,
TrunkGroup_ FirstTrunkId , TrunkGroup_ FirstBChannel ,
TrunkGroup_ LastBChannel , TrunkGroup_ FirstPhoneNumber ,
TrunkGroup_ ProfileId , TrunkGroup_ LastTrunkId ,
TrunkGroup_ Module
For example:
;
[\TrunkGroup]
TrunkGroup 0 = 1, 0, 0, 1, 4, 101, 0, 1; (Hunt Group ID 1,
channels 1-4, phone number 101 for Channel 1)
TrunkGroup 1 = 1, 0, 0, 5, 8, 201, 0, 0; (Hunt Group ID 1,
channels 5-8, phone number 201 for Channel 5)

The first entry in this table starts at index 0.
Notes:


Each endpoint (i.e., channel) must be assigned a unique
phone number. In other words, no two endpoints can have
the same phone number.

For configuring this table in the Web interface, refer to
The parameters TrunkGroup_FirstTrunkId,
TrunkGroup_LastTrunkId, and TrunkGroup_Module are not
applicable.
Configuring the Endpoint Phone Numbers 149 on page .