AudioCodes Media Pack MP-112, Руководство пользователя

Страница: 294 / 486

SIP User's Manual 294 Document #: LTRT-65412
MP-11x & MP-124
Parameter Description
initiates the waiting call plays a Call Waiting Ringback
tone to the calling party after a 182 response is
received.
For example:
CallWaitingPerPort 0 = 0; (call waiting disabled for Port 1)
CallWaitingPerPort 1 = 1; (call waiting enabled for Port 2)

Notes:

This parameter is applicable only to FXS ports.

You can configure up 8 table entries for MP-118 and up to
24 entries for MP-124.

If this parameter is not configured (default), call waiting is
determined according to the global parameter
EnableCallWaiting.

The device's Call Progress Tones file must include a 'call
waiting Ringback' tone (caller side) and a 'call waiting' tone
(called side, FXS interfaces only).

The EnableHold parameter must be enabled on both the
calling and the called sides.

For configuring this table using the Web interface, refer to
Configuring Call Waiting on page
148 .
For a description on using ini file table parameters, refer to
Structure of ini File Table Parameters on page
191 .
Number of Call Waiting Indications
[NumberOfWaitingIndications]
Number of Call Waiting indications that are played to the called
telephone that is connected to the device (FXS only) for Call
Waiting.
The valid range is 1 to 100 indications. The default value is 2.
Time Between Call Waiting
Indications
[TimeBetweenWaitingIndications]
Time (in seconds) between consecutive call waiting indications
(FXS only) for call waiting.
The valid range is 1 to 100. The default value is 10.
Time Before Waiting Indications
[TimeBeforeWaitingIndication]
Defines the interval (in seconds) before a call waiting
indication is played to the port that is currently in a call (FXS
only).
The valid range is 0 to 100. The default time is 0 seconds.
Waiting Beep Duration
[WaitingBeepDuration]
Duration (in msec) of call waiting indications that are played to
the port that is receiving the call (FXS only).
The valid range is 100 to 65535. The default value is 300.
6.8.3 Call Forwarding Parameters
The call forwarding parameters are described in the table below.
Table 6-35: Call Forwarding Parameters
Parameter Description
Enable Call Forward Determines whether Call Forward is enabled.
[EnableForward]

[0]

Disable = Disable the Call Forward service.
[1] Enable = Enable Call Forward service (using REFER) (default).
For FXS interfaces, the 'Call Forward' table (refer to Configuring Call