- 56 -
Input Selection
There are several ways to select a source. You can simply use the
input up or input down buttons. You can also directly access inputs
numerically. If a room is off or if the system in all off, those buttons will
be depressed. When an input is selected, the room turns on.
Bass & Treble Control
Bass and Treble are controlled in two ways, there
is the standard up and down commands which will
raise and lower bass and treble levels over a range
from -12 to +12 with 0 being tone control flat. Tones
levels are stepped numerically in two’s, from 0 to 2
to 4 etc. You can also do a bass or treble direct
command which enters a value using the slider con-
trol. Much like a touch screen with sliders, the
numeric tone level is jumped to as the slider is re-
leased.
Loudness & Stereo Enhancement Filters
There are two additional filters associated with
tones. The loudness filter engages additional bass.
The stereo enhancement filter opens the stereo
imaging of the sound stage.
Tone Presets
There are four tone presets. To store a preset for a specific bass and treble level, set the tone
controls to that level and then press either one of the four tone preset store buttons. To recall
a tone preset, press the corresponding recall button. Please note, that the status of the filters
will also store with the tone presets. If the loudness filter was on and the stereo enhancement
filter was off when preset number 2 was stored, they will return to these settings when preset
number 2 is recalled. Tone preset number 1 is recalled when the zone turns on providing the
zone is set to turn on to recall 1.
Balance Control
Balance is a feature of a speaker channels volume level and the
range swings from Left 40 to Right 40, with the balance set to
Equal when centered between right and left channels. There are
two balance presets. To store a balance preset, set the balance
control to the desired level and then press one of the two store
buttons. To recall the balance level, press the appropriate recall
button. Balance preset number one is recalled when the zone
turns on providing the zone is set to turn on to recall 1.
