GOLDENEAGLE TV 6.0.x user manual
– 07/2012
Page 39
Head Office
: Parc d’activites Kennedy - 20, avenue Neil Armstrong – F-33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928
– Fax +33 (0)5 57 928 929 –
–
www.audemat.com
The acknowledgment mode (Trap V1, Trap V2c or Inform) is identical for all alarms. See the next section
“Notifications”
for additional settings.
With “SNMPv2c traps” notifications, it not possible to acknowledge traps.
In the same way, traps which do not require acknow
ledgment cannot be sent with the “Inform
SNMPv2c” format, even when this format is selected. This is the case with the ‘test’ trap as well as with
equipment information traps such as the ‘Equipment On’ trap.
6.1.12. Notifications
SNMP Actions
The user may replay traps that have not been acknowledged yet.
The user may also delete pending traps that have not been acknowledged yet.
Configuration depending on notification type
In the "Mode" column:
“Do not send”: used for temporarily suspending sending certain types of alerts
“Send and Forget”: standard SNMP mode, no acknowledgement awaited, notifications are
deleted immediately after sending.
“Resend until acknowledged”: standard GOLDENDVB-T/H alarm mode. Notifications are re-
transmitted until acknowledgement is received. The acknowledgement mode depends on the
sending mode:
automatic acknowledgement for sending with INFORM
manual acknowledgement for Traps V1 and Traps V2c
Principles of Re-transmission / Acknowledgment
In the
“Resend until acknowledged” mode, it is possible to set the maximum number of tries and the
acknowledgment timeout.
As long as an acknowledgement has not been received, the notification is re-transmitted at the rate of once
every <d> seconds, for a maximum of <n> times; where <d> and <n> are the <Ack Timeout> and <Max
Retries> fields respectively.
