22/31
Note 11.1 Save a recipe
After a recipe has been entered, the user can save this current program as a recipe for
future use.
Go to Parameter Setting mode by holding the SET key, and then go to “
Control Setting
”
menu, find parameter “
Save Recipe
”, press SET key again so you can change its value.
If you press
▲
or
▼
key repeatedly, you will see “Back”, “B1”, “B2”, “C1”, “C2”, “F1”,
“F2” one by one. Locate the recipe you want to save to, then press SET key to confirm.
Figure 26 shows the flow chart of how to save a recipe.
00000000000000000000
00000000000000000000
> Cont ro l Sett i ng
System Con f i g
00000000000000000000
00000000000000000000
>Smkr Hi A l arm 350
Smkr Lo A l arm 50
00000000000000000000
00000000000000000000
>Save Rec i pe Back
Reca l l Rec i pe Back
Save Rec i pe Back
Save Rec i pe B1
SE T
SE T
/
/
SE T
00000000000000000000
00000000000000000000
>Back
Smkr Hi A l arm 350
SET
Figure 26. Flow chart of saving a recipe.
Note 11.2 Recall a recipe
You can recall your previous saved recipe to your current program. Please note your
current program will be overwritten. Please write your current program down somewhere
if it is important to you.
Go to Parameter Setting mode by holding the SET key, and then go to “
Control Setting
”
menu, find parameter “
Save Recipe
”, press SET key again so you can change its value.
If you press
▲
or
▼
key repeatedly, you will see “Back”, “B1”, “B2”, “C1”, “C2”, “F1”,
“F2” one by one. Locate the recipe you want to save to, then press SET key to confirm.
7.2 System Configurations
Parameters related device configurations which are not often used during the smoking
process are listed under “
System Config
” menu. Details of each parameters are listed in
Table 3. The flow chart in Figure 27 shows the operations of accessing and adjusting the
parameters in “
System Config
”.
