22/33
parameters are set and are used for the system. The new parameters will store in the
memory even the power is off. To cancel the current auto-tuning process, please set this
parameter to OFF. For more information about auto-tune, please see section 10.
Note 11. Save & Recall Recipes:
This controller can save up to 6 pieces of smoking
recipe (programs). Each recipe file can have up to 6 steps (C-1 to C-6). For convenience,
we have pre-named these 6 pieces of recipe files as B1 (beef), B2, C1 (chicken), C2, F1
(fish), F2. These recipe files are all the same except their names, so you can store your
special recipe to any of them. These recipes can be stored in the memory of the
controller even when it is powered off. You can overwrite the exist recipe with a new one.
Note 11.1 Save a recipe
After a recipe has been entered, the user can save this current program as a recipe for
future use.
Go to the Parameter Setting mode by holding the SET key and then go to “
Control
Setting
” menu, find parameter “
Save Recipe
”, and press the SET key again so you can
change its value. If you press the
▲
or
▼
key(s) repeatedly. You will see “Back”, “B1”,
“B2”, “C1”, “C2”, “F1”, “F2” one by one. Locate the recipe you want to save to, then press
the SET key to confirm. Figure 26 shows the flow chart of how to save a recipe.
00000000000000000000
00000000000000000000
> Cont ro l Sett i ng
System Con f i g
00000000000000000000
00000000000000000000
>Smkr Hi A l arm 350
Smkr Lo A l arm 50
00000000000000000000
00000000000000000000
>Save Rec i pe Back
Reca l l Rec i pe Back
Save Rec i pe Back
Save Rec i pe B1
SE T
SE T
/
/
SE T
00000000000000000000
00000000000000000000
>Back
Smkr Hi A l arm 350
SET
Figure 26. Flow chart of saving a recipe.
Note 11.2 Recall a recipe
You can recall your previous saved recipes to your current program. Please note your
current program will be overwritten. Write your current program down somewhere if it is
