15/33
Figure 18. How to enter a cooking profile.
The example program in table 1 is used in this flow chart as a demo.
4.1.2 Single-Step Mode
In single-step mode, you can only access and change the target cabinet temperature of
Step 1 from the device. The controller will try to maintain the smoker temperature at the
set temperature (Smkr Temp) of Step 1 continuously as long as the controller is powered
on. If this controller is powered off and turned back on again, it will resume operating in
this mode. You can still view and change settings in other steps in Cooking Profile on the
AuberWIFI app (for WIFI model only), but they don’t apply to this mode.
To change the set temperature in single-step mode, press the SET key once; it will show
“Step: 1” and the current target cabinet temperature in the top line. A curser “>” will be
shown on the left indicating which line will be selected. Press the SET key once. The
current set temperature should start blinking. Use
▲
and
▼
keys to change the set
temperature. When finished, press the SET again to confirm the change. That number
will stop blinking. Press the Timer/Back key to exit the menu. Or use
▲
or
▼
key to
scroll to “Back” and then press SET key to exit. The display will return to the normal
display mode if no key is
pressed in 15 seconds.
00000000000000000000
00000000000000000000
>Step 1 SmkrTemp 250
Back
00000000000000000000
00000000000000000000
Smkr 137 Food 122
Set 250 Probe3 270
00000000000000000000
00000000000000000000
>Step 1 SmkrTemp 250
Back
00000000000000000000
00000000000000000000
Step 1 SmkrTemp 250
> Back
SET
Press
SET
Press
Use
or
keys to adjust
set pit temp. Press SET key
to confirm.
Press
SET
Figure 19. How to change the set temperature in single-step mode.
4.1.3 Program Status & Control
(for firmware version 1.7.4 or newer)
Users can check or change current program running status by this parameter. It can be
used to stop/start the program, or jump to a different step. This parameter is under the
Cooking Profile menu as stated in section 4.1. Parameter name showing on the
controller’s display is
Prog Status.
Available options for this parameter are: Stop, Start,
Step 1 ~ 6, Back.
When pressing the SET button momentarily to enter Cooking Profile menu, it will display
