Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
48
Step 4.
Download program to Au J1939 Simulator
Click “Program” button (Figure C-13).
The flash of the J1939 Simulator will be erased first, it takes a few seconds. Then the pre-loaded "xxxx.Aud" file will be
programmed into Au J1939 Simulator, and the programming status will show up (Figure C-14).
Figure
C-14
Figure
C-15
This process may take a few minutes depending on the file size and communication speed. When programming finished,
click “exit” to exit Bootloader mode (Figure C-15).
The Au J1939 Simulator should function normally with the new code now.
Thank You
Thank you for choosing Au Group Electronics products.
Should you have any question or comments, please contact us at:
Please visit our website for recent product releases and the latest news.
www.AuElectronics.com
Our products can be ordered 24/7 at our on-line store:
http://www.auelectronics.com/products/
We look forward to serving you again in the near future.
