Au Group Electronics
Au SAE J1939 Simulator (Gen II) 2.00A User Manual Rev. D
45
Appendex C - Au PIC Serial Bootloader Application Note
C-1 What’s needed Before Install Au PIC Bootloader?
•
A PC equipped with serial port or PC equipped with USB port + “USB to Serial Converter".
•
Serial cable to connect a PC to a PIC target board.
•
Au PIC Bootloader installation program (it is available through Au Group Electronics)
•
An encrypted PIC-code file with extension of "Aud" (it will be provided by Au Group Electronics for different
products, e.g. SAE-J1939 simulator, etc.)
C-2 How to Install Au PIC Bootloader
Note:
If the Au PIC Bootloader has been installed on PC before, please bypass step 1 to step 8, and start with step 9.
1. Double click icon of the “Setup Au PIC Bootloader V1.00B” to start installing Au PIC Bootloader (Figure C-1).
Figure C-1 - Setup Au PIC Bootloader V1.00A icon
2. “Welcome to the Au PIC Bootloader Setup Wizard” window show up, click “Next” (Figure C- 2)
Figure
C-2
Figure
C-3
3. “License Agreement” window show up, read the license agreement and select “I accept the agreement”, then click
“Next” to continue (Figure C-3).
4. “Select Destination” window shows up, use default path: C:\Program Files\ AU PIC Bootloader”, then click “next” to
continue (Figure C-4).
Figure
C-4
Figure
C-5
