8
●
Normally, use the product with the au Nano IC Card 04/microSD
memory card cover closed. If the cover is open, dust or water may
get inside causing a fault.
●
Do not let liquids, metal objects or other foreign objects enter the au
Nano IC Card 04 tray slot or microSD memory card slot. Doing so
might cause a fault.
●
Do not drop, throw, stomp or subject to strong impact.
Doing so might cause a fault.
●
Do not place the product directly on sand at a beach, etc. Sand or
other small particles might enter the earpiece (receiver)/speaker,
mouthpiece (microphone) or earphone/microphone jack, causing
the volume to drop. Letting sand or other small particles enter the
product might cause overheating or a fault.
■
Touch Panel
●
Placing a sticker or sheet (e.g. a commercially available protective
film, peep prevention sheet) on the display might hinder correct
operation of the touch panel.
●
When carrying the product in a pocket or bag, take care not to put
the touch panel close to metals or other conductive materials; doing
so might cause the touch panel to malfunction.
■
Internal Battery
(The internal battery of the product is a lithium-ion battery.)
The internal battery is not fully charged at the time of purchase. Charge
it before using the product. In addition, charge the battery after a long
time of disuse before using the product.
●
Use of the product in very hot or cold environments, for example,
leaving it in a vehicle with the windows closed in summer, will
decrease the internal battery capacity and shorten the available
battery usage time. This will also shorten the internal battery's life.
Try to use the product at room temperature whenever possible.
●
The internal battery gradually discharges after charging even if the
product is not used. The internal battery may discharge completely
after a long period of disuse. It is recommended you charge it before
using the product.
●
The internal battery is a consumable item. If its performance does
not recover, for example, if the usable time is extremely short even
after charging, the internal battery is at the end of its life; discontinue
use. Since the battery is a built-in type, its replacement requires
submission of the product to an au shop, etc. for a paid repair. In
addition, you may not be able to use the product for a certain
period. Note that the internal battery's life varies depending on the
usage, etc.
●
To avoid decreasing the performance and life of the internal battery,
do not store the product in the following conditions:
•
The battery is fully charged (immediately after charging is
complete)
•
The battery has run out (too low to turn on the product)
•
In extremely hot or humid conditions
●
Depending on the usage, the internal battery may swell up near the
end of its life. This is due to the properties of lithium-ion batteries,
and does not affect safety.
■
Charger
●
Do not wrap the power cord of the specified charger (sold
separately) around the charger body. Do not forcibly bend the
charger's plug or the connection between the connector and power
cord. Do not place a heavy object on the cord of the charger (sold
separately); do not apply excessive force by pulling, etc.
Doing so might cause a fault.
●
When unplugging the power plug of the specified charger (sold
separately) from the outlet, hold the power plug. Pulling the cord
may damage the cord.
■
au Nano IC Card 04
●
Do not forcibly remove or insert the au Nano IC Card 04. Be careful
not to apply excessive force when inserting the card into your au cell
phone.
●
You are responsible for any damage caused by inserting the au
Nano IC Card 04 into other devices such as an IC card reader/
writer.
●
Do not place a sticker, etc. on the au Nano IC Card 04.
●
Do not subject the au Nano IC Card 04 to actions that can damage
it (using in hot places, throwing in a fire, letting a foreign object come
into contact with the metal contacts, subjecting to impact, bending
or pressing, wetting, etc.). Doing so might erase data or cause a
fault.
■
Camera
●
If the camera lens breaks, discontinue use immediately and contact
an au shop or Keitai Guarantee Service Center. Continued use may
cause injury.
●
Test the camera before shooting special moments.
●
Do not use the camera in places where shooting is prohibited.
■
Copyrights and Portrait Rights
●
If the data you shot or recorded using the product or the data you
downloaded from the Internet, etc. is in part or in whole protected
by the third party's copyright, you are not allowed to copy, distribute,
publicly send, or modify the data without the consent of the
copyright holder, except for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it may infringe on portrait rights.
Note that shooting and recording may be restricted at some live
performances, shows and exhibitions, even for personal use.
●
Be careful about copyrights and portrait rights when posting still
pictures you shot, etc. on websites.
■
Back Up Contents of the Product
●
Back up important contents of the product's memory. They may be
lost or altered due to unpredictable factors such as static electricity
and a fault, or by repair, mishandling, etc.
Available Security Codes
Security Codes
Various security codes are available on the product.
See below for the available security codes. Do not forget them as they
are necessary for various operations and contracts.
Be sure to change the default values to your own.
■
Security Code
Usage example
①
To use voicemail and call forwarding services
remotely from a landline phone
②
To use Customer Service Center or to make
inquiries, subscribe to services, or change your
subscription details on the au website
Default value
A four-digit number you wrote in the application
form
■
Security Key
Usage example To set or cancel call blocking, etc.
Default value
1234
Be sure to change the default value to your own.
■
PIN Code
Usage example To prevent unauthorized use of the au Nano IC
Card 04 by third parties
Default value
1234
Be sure to change the default value to your own.
PIN
■
PIN Code
To prevent unauthorized use of the au Nano IC Card 04 by third
parties, set the product to require PIN code entry every time the power
is turned on. You also need to enter the PIN code when setting
whether PIN code entry is required.
The PIN code is locked after three consecutive failed entry attempts.
Unlock the PIN code using PUK code.
•
At the time of purchase, the PIN code is "1234," and PIN code entry
is not required. Change the PIN code to any four- to eight-digit
number and set the product to require PIN code entry if necessary.
If you set the product to require PIN code entry, be sure to change
the PIN code to your own.
■
PIN Unlock Key (PUK) Code
Use to unlock the PIN code.
•
PUK code is an eight-digit number given at the time of purchase. It is
printed on the back of the plastic card on which the au Nano IC Card
04 is attached.
•
After entering the PUK code, you need to set a new PIN code.
•
If you enter the wrong PUK code ten times consecutively, you will
need to contact an au shop, PiPit or Customer Service Center.
•
PIN code is not reset by initializing the product.
◎
If the PIN code gets locked, the product may restart for security
reasons.
Содержание Basio 2
Страница 1: ......