14
Removing the microSD Memory Card
Unmount the microSD card (
▶
P. 14) before removing it. Failure to do
so may corrupt data on the card or cause the card to malfunction.
1
Open the au Nano IC Card 04/microSD memory
card cover (
▶
P. 13)
2
Gently push the microSD memory card in all the
way
After a click, pull your finger back while touching the microSD
memory card until the card stops coming out. If you release the
card after pushing it in hard, it may jump out.
3
Gently pull the microSD memory card straight out
4
Close the au Nano IC Card 04/microSD memory
card cover (
▶
P. 9)
◎
Do not remove the microSD memory card forcibly. Doing so might
cause damage or loss of data on the card.
◎
The microSD memory card may become warm after a long period
of use. This is not a fault.
Unmounting the microSD Memory Card
1
Home screen
→
[
設定
] (Settings) under "
ショートカッ
ト
" (Shortcuts)
→
[All settings menu]
→
[Storage &
USB]
Storage & USB screen appears.
2
[ ] beside the name of the microSD memory card
To mount the microSD memory card again: Storage & USB screen
→
Tap the name of the microSD memory card
→
[Mount].
Charging
Notes on Charging
The internal battery is not fully charged at the time of purchase. Be
sure to charge it before using the product.
•
If the performance of the internal battery does not recover, for
example, if the usable time is extremely short even after charging, the
battery may be at the end of its life. To check the charging
performance of the internal battery: Home screen
→
[
設定
] (Settings)
under "
ショートカット
" (Shortcuts)
→
[All settings menu]
→
[About
phone]
→
[Status]
→
[Battery status].
•
While charging, the charging lamp illuminates in red and appears in
the battery indicator. The charging lamp illuminates in green when the
charge is approximately 95%. The charging lamp goes out when the
charge is full.
◎
The product may become warm while charging. This is normal.
◎
The internal temperature of the product may increase depending
on the operation or usage environment, causing the product to
become hot. In such cases, charging may stop for safety.
◎
Charging may take longer if the product is in use (for the camera
or other functions).
◎
If you use the product while charging with the specified charger
(sold separately), the internal battery may charge and discharge
repeatedly in a short time. Frequent charging shortens the life of
the battery.
◎
If you charge the internal battery after it has run out, the charging
lamp may not illuminate immediately (charging is in progress).
◎
If the charging lamp is flashing in red, force the power off (
▶
P. 15)
and then turn the product back on. If the lamp is still flashing, stop
charging and contact an au shop or Keitai Guarantee Service
Center.
◎
The continuous talk time and continuous standby time (
▶
P. 24) are
average measurements obtained in strong signal conditions at
rest. The actual usable time may be less than half depending on
the charge on the battery, usage environment such as temperature
or signal reception, function settings, etc. See below for the
examples.
•
Frequent use of the product in places where (out of service
area) appears on the display.
•
Use of the Wi-Fi
®
function, Bluetooth
®
function, mail functions,
camera, TV, location information, etc.
•
The display is set to remain turned on in applications, etc.
•
Applications are running in the background.
◎
If you stop charging while the charging lamp illuminates, the
charge may not be full even if is displayed on the display. In
such cases, the usable time shortens.
Charging with the Desktop Holder
(SHV36PUA) and Specified AC Adapter
(Sold Separately)
Charge by connecting the desktop holder (SHV36PUA) and common
AC adapter 05 (sold separately). For details on the specified AC
adapter (sold separately), refer to "Introduction of Peripheral Devices"
(
▶
P. 21).
1
Insert the microUSB plug of the common AC
adapter 05 (sold separately) into the connection
terminal of the desktop holder (SHV36PUA)
Check the orientation of the microUSB plug, and then insert it in
the direction of the arrow.
Tabs
Connection terminal
Common AC adapter
05 (sold separately)
Desktop holder
(SHV36PUA)
2
Place the product in the desktop holder
(SHV36PUA)
Place it as shown below.
Desktop holder
(SHV36PUA)
3
Plug the power plug of the common AC adapter 05
(sold separately) into a 100 V AC outlet
Common AC adapter 05
(sold separately)
4
When charging is complete, remove the product
from the desktop holder (SHV36PUA), and then
unplug the power plug of the common AC adapter
05 (sold separately) from the outlet
Hold the desktop holder (SHV36PUA) when removing the product
from it.
When removing the microUSB plug of the common AC adapter 05
(sold separately) from the desktop holder (SHV36PUA), pull it
straight out.
◎
When using the desktop holder (SHV36PUA), connect only the
specified charger (sold separately) to it. Do not connect
unspecified equipment such as a PC or portable charger to the
desktop holder (SHV36PUA); doing so might cause a fault.
◎
Although charging is possible even while the product is turned on,
charging takes longer.
Содержание Basio 2
Страница 1: ......