
7
Handling Precautions
These precautions are provided to prevent product faults and to
ensure that performance can be fully demonstrated.
Thoroughly read these precautions for proper use.
■
Precautions Common to the Main Unit, Internal Battery,
Charger, au Nano IC Card 04, Peripheral Devices
●
Do not apply excessive force to the product during use. Be sure not
to put the product into a tightly packed bag or place a heavy object
on the product in a bag. Sitting on the product in a pocket might
damage the main unit, display or internal circuit board resulting in a
malfunction.
Keeping an external device connected to the external connection
jack might damage the connector resulting in a malfunction. Such
damage and malfunction are not covered by the warranty, even if
there is no external damage.
●
To ensure waterproof and dustproof properties (equivalent to IPX5,
IPX8 and IP5X) of the product, use the product with the au Nano IC
Card 04/microSD memory card cover securely closed.
Note that the waterproof and dustproof properties are not
guaranteed in all circumstances. Do not let foreign objects such as
liquid or dust enter the product or attach foreign objects such as
liquid or dust to the charger or optional accessories. Do not open/
close the au Nano IC Card 04/microSD memory card cover in the
rain or with water drops on the surface of the product. Doing so
might cause water ingress resulting in internal corrosion.
Malfunctions determined to be caused by water seepage are not
covered by the warranty.
●
Do not use any of the following in extremely hot, cold or humid
places. (Use within an ambient temperature range of 5
°
C to 35
°
C
and humidity range of 35% to 85%.)
•
SHV36
•
au Nano IC Card 04 (inserted into the SHV36)
•
Charger
•
Peripheral devices
●
Do not use in places subject to excessive dust or vibration. Doing
so might cause a fault.
●
Clean the product with a soft dry cloth (such as the type used for
eyeglasses). Forceful rubbing with a dry cloth may scratch the
display. The display may be stained if splash or smear is left
attached to the surface.
Wiping the product using alcohol, thinner, benzine, detergent, glass
cleaner, etc. might erase the printing on the outer casing or cause a
fault.
●
Use as far away as possible from landline phones, TVs and radios.
Use nearby might affect them.
●
The product may become warm while charging or during operations.
This is normal.
●
Do not place near corrosive chemicals or in places where corrosive
gas is generated. Doing so might cause a fault.
●
Do not use outside when you hear thunder. There is a risk of
lightning strikes and electric shock.
●
Be sure to use only the specified peripheral devices. Use of other
peripheral devices might cause a fault.
●
Do not put the product in a cooking apparatus such as a microwave
oven or pressure vessel. Doing so might cause a fault.
●
The customer is not allowed to disassemble, modify or repair the
product. Doing so might cause a fault.
In addition, modification of the product is in violation of the Radio
Law and/or the Telecommunications Business Law.
●
To prevent short-circuiting of the external connection jack and
earphone/microphone jack, do not let your finger or any other part
of your body or conductive materials (metal strip, pencil lead, etc.)
come into contact with or enter these areas. Doing so might cause
a fault.
●
If the product gets wet while charging, unplug the power plug of the
specified charger (sold separately) immediately.
●
Do not use the product while driving a car or riding a motorbike or
bicycle or while walking. Use of a cell phone while driving a car or
riding a motorbike is prohibited by law. Use of a cell phone while
riding a bicycle may be punishable by some regulations.
●
Do not use or charge the product when it is in a bag or covered with
bedding, etc. Doing so might cause a fault.
●
When using a charger or external device, insert/remove the
connector straight into/from the jack. Inserting/removing in an
incorrect orientation might cause a fault.
●
Do not expose the camera lens to direct sunlight for an extended
period. Doing so might cause a fault.
●
Do not use, store or leave the product in places subject to direct
sunlight (e.g. inside a vehicle), in hot places, in extremely cold
places, or in humid or dusty places. Doing so might cause a fault.
●
Do not place the product on a wobbly table, sloped surface, or
other unstable location. Be especially careful while charging or when
the product is set to vibrate. Doing so might allow the product to fall
and cause a fault, etc.
●
When charging the product, do not exceed the rating given for the
outlet or wiring (for example, by connecting multiple devices to a
single power strip).
●
When the product becomes warm during use, the screen brightness
or some of its functions may be restricted.
■
Main Unit
●
The battery is built into the product and it is not user replaceable.
For replacing the battery, contact an au shop or Customer Service
Center.
●
Do not forcefully press, tap or intentionally subject the display to
strong impact. Doing so might cause scratching or damage.
●
Do not forcefully press sharp objects or hard objects against keys or
display surface. Doing so might cause scratching or damage.
●
The touch panel is designed to be lightly touched by fingers. Do not
apply strong pressure to the touch panel with your fingers or press
sharp-pointed objects (such as ballpoint pens and pins) against it.
The touch panel may not respond or may malfunction in the
following cases.
•
Operation with gloved hands
•
Operation with fingernails
•
Operation with a foreign object left on the touch panel
•
Operation with a protective film or sticker on the touch panel
•
Operation with water drops or condensation on the touch panel
•
Operation with wet or sweaty fingers
•
Operation under water
●
Never use the product if it is modified. Use of a modified device
violates the Radio Law and/or the Telecommunications Business
Law.
To view the unique authentication and standard marks (including
certification/authentication numbers) for the product, perform the
following operations.
Home screen
→
[
設定
] (Settings) under "
ショートカット
" (Shortcuts)
→
[All settings menu]
→
[About phone]
→
[Authentication]
The product has acquired the certification of conformity with
technical regulations for the specified radio station based on the
Radio Law and certification of conformity with technical regulations
for the terminal based on the Telecommunications Business Law,
and the "Technical Conformity Mark " can be found in the product
as a certificate. View contents of electrical certificates in the product
for information on certification.
If any of the internal components of the product is modified, the
certification of conformity with technical regulations will become
invalid. Never use the product without the valid certification. Doing
so violates the Radio Law and/or the Telecommunications Business
Law.
●
Take care not to place magnetized items such as magnetic cards,
speakers and TV sets near the product, as it might cause
malfunction.
Placing strong magnetism close to the product might cause false
operation.
●
Do not bring the product close to magnetized objects such as cash
cards, credit cards, and prepaid cards. Doing so might result in loss
of saved data.
●
When putting the product in a pocket or bag, keep the display away
from metal objects and other hard objects to prevent scratches and
damage. If using a strap whose metal or other hard part may come
into contact with the display, be careful not to scratch or damage
the display with it.
●
When suddenly brought into a warm place from a cold place, or
when in a humid location, or when used where temperature
suddenly changes (e.g. near the air discharge port of an air
conditioner), water drops (i.e. condensation) might be formed inside
the product. Note that when used under conditions such as this,
humidity might cause corrosion or a fault.
●
Do not forcibly insert or remove a microSD memory card. Doing so
might injure your hand or finger.
●
While writing/reading data to/from a microSD memory card, do not
subject the product to vibration or impact or turn off the power.
Doing so might cause loss of data or a fault.
●
Do not cover the light sensor with your finger or place a sticker, etc.
on it. Doing so may hinder the light sensor from detecting the
ambient light level and the sensor may not work correctly.
●
Do not place a sticker, etc. on the proximity sensor. Doing so may
cause the sensor to malfunction and the display may remain turned
off while making a call or during a call, making it impossible to
operate the product.
●
Covering the earpiece (receiver)/speaker, mouthpiece (microphone),
sub microphone, or air vent with a sticker, your finger, etc. may
hinder the performance of the product.
●
If you hold the product to talk with your hair covering your ear, the
proximity sensor may malfunction. This may cause the display to
remain on, allowing the call to be disrupted if the display is
accidentally touched.
●
If the display breaks, discontinue use immediately and contact an au
shop or Keitai Guarantee Service Center. Continued use may cause
injury.
●
Do not apply excessive force to the sliding part of the camera slide
cover. Doing so might cause a fault or damage. Handle the cover
carefully.
●
Placing a sticker, etc. on the display or a key may cause malfunction
or shorten the usage time. Doing so may also damage the product.
●
If you place magnetized objects, metal straps, etc. close to the
product, the speaker may emit sounds. This is not a fault.
●
Note that forcibly pulling or applying excessive force to the au Nano
IC Card 04/microSD memory card cover may damage it.
●
The display may be hard to see in bright places such as under the
direct sunlight. This is not a fault.
Содержание Basio 2
Страница 1: ......