ATX VersAtive Pro, Руководство по эксплуатации

Страница: 54 / 58

CHAPTER 7: MKIP SYSTEM SHELL
7-8 VersAtive
®
Pro Enhanced – Operation Manual
2. Enter the time and date in the format: Day Month Year HH:MM:SS (Example 3 mar 2013 11:22:00 ), Figure 7-23.
Click OK .
3. Time will be set to the specified time and any NTP server IP addresses will be cleared.
Menu - Set Time by NTP
The Device time may be set to be updated by an NTP server. This is the only way to define the NTP server. It cannot be set
from the GUI.
1. Select
Set Time By NTP
from the menu, Figure 7-24.
2. Enter the IP address of the NTP server. Do not use the url, Figure 7-25. Click OK .
3. In the open dialog shown in Figure 7-26, note the time zone that is currently set. If this time zone is incorrect then
after setting the NTP IP address, you must also set the Time Zone from the menu next.
4. If the time zone was incorrect, select Set Time By NTP again from the menu, Figure 7-24. This time choose Time
Zone , Figure 7-25.
Figure 7-24: Select ‘Set Time By NTP’
Figure 7-25: Choose ‘Set NTP Server IP’
Figure 7-26: Enter the IP address