ATX VersAtive Pro, Руководство по эксплуатации

Страница: 34 / 58

CHAPTER 4: TRANSCODING APPLICATION
4-8 VersAtive
®
Pro Enhanced – Operation Manual
Setting Value Description
Protocol Dropdown
menu
Choice between UDP & RTP; default is UDP .
URL IP Address Enter the IP address or URL for the publish. Entry of URL requires a DNS entry defined on the
management port IP settings.
Port Integer Enter the port number associated with the URL.
Multicast Tick Box Tick this box if the IP address is within the multicast address range.
4.6 Publish an SPTS Stream
A Publish defines the Output IP Address of the SPTS Stream. Any Stream may have any number of Publishes added by
repeating these steps for each.
Procedure
This procedure explains how to add and SPTS Stream Publish to an existing SPTS Stream.
1. Select the
SPTS Stream
by clicking it, Figure 4-10.
2. Select New Publish on the Tool Bar.
3. Give the Publish point a meaningful Name such as IP Address or type of publish or accept the default, Figure 4-11.
4. Add a New Connection by adding IP address and port number then choose the physical Output Ethernet Interface
and protocol (Ports available may differ between models and could include VLANs if previously configured).
NOTE: For details and guidance on configuring these settings, see “4.5 Publish Configuration”
on page 4-7
5. Tick the Multicast box if this is a multicast IP address (default is unticked - unicast).
6. Click Add to create and add the connection to the Connections list, see Figure 4-12. More output connections may
be added, just add more New Connections.
1
2
Figure 4-10: New SPTS Publish
3
4
5
6
Figure 4-11: Refine Publish Properties