ATX VersAtive Pro, Руководство по эксплуатации

Страница: 48 / 58

CHAPTER 7: MKIP SYSTEM SHELL
7-2 VersAtive
®
Pro Enhanced – Operation Manual
5. Navigate the shell menu in three ways:
◦ Type the letter appearing in red font
◦ Use the keyboard up/down arrows
◦ Use a mouse left click
◦ To select, either click OK or use keyboard Return/Enter
7.3 MKIP Shell Menu
There are a number of operations that may be performed at the mkip system shell menu as described in Table 7.3a.
Table 7.3a: MKIP System Shell Menu Choices
Setting
Keyboard
shortcut
Description
Display D Displays system information such as all the IP addresses (including virtual
addresses), subnet masks, gateways and physical MAC addresses.
Set Network S Change the IP address settings of eth1, eth2, eth3 and eth4 (not eth0). Also
enables the addition of virtual interfaces, which may used for VLAN tagging.
Ping P PING is a network interface utility to test connectivity to other network Devices.
TCP dump T Allows the user to check source multicasts on each of the eth ports.
eth0 set Default e Restores all eth0 settings to their Factory Setting with the management IP address
(eth0) set to 192.168.0.23.
Date and Time D Enter date and time manually. This disables NTP updates.
Set Time by NTP S Enter NTP server address to automatically set date and time and over-ride any
manual settings. Time zone locale is set here also.
Restart R Causes the server to reboot.
Shutdown S Causes the server to immediately shutdown and not restart.
Authentication Mode A Sets the Apache Authentication mode between Local Authentication (Default) and
use of a RADIUS Server.
7.4 Menu - Display
1. Click Display to choose to display system IP addresses, Figure 7-3.
Figure 7-3: MKIP System Configuration Settings Menu