manualshive.com logo in svg

ATX DigiVu II, Руководство по эксплуатации, Страница: 9 / 114

Поделиться
Скачать
ATX DigiVu II Скачать руководство пользователя страница 9

CHAPTER 1: GUI ENVIRONMENT

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual 

1-3

The  stream  defines  the  resolution,  bitrate,  audio  codec,  and  CBR/VBR  for  the  stream.  Multiple 

streams may be added to the session. In the case of the SPTS Stream instance, there cannot be any 

other streams added.

• 

Create Adaptive Sessions

A session is intended for MBR applications and defines the codec to be used for the series of output 

streams. Multiple sessions may be added to any resource. SPST Stream is for IPTV applications.

• 

Create Publish Points

The publish defines the output protocol, SPTS, HLS etc, the output IP and interface. Multiple Publish 

Points may be added to the stream.

• 

Start Encoding or Transcoding Streaming from the Resource icon.

1.4.5  Covered in Ethernet Multiplexer Chapter

• 

Create an Ethernet Multiplex.

If a number of programs will be aggregated into a single MPTS stream, first create a MUX instance.

• 

Create TS Sources to the MUX.

• 

Create a program to the TS source.

1.4.6  Covered in QAM Multiplexer Chapter

• 

Create a QAM Multiplex to the Device icon.

If a number of programs will be aggregated into a single MPTS stream, first create a MUX instance.

• 

Create TS Sources to the MUX.

• 

Create a program to the TS source.

1.5  The GUI

The GUI is based on a familiar 

Tree

 and 

Tabbed Pane

 design, Figure 1-4. The main parts are:

1.  Tree View of Managed Elements.
2.  Pane View of the Selected Element.
3.  Tool Bar.
4.  Path of Selected Element.
5.  Context Sensitive Right Click Menu.
6.  Tree View Search Tool.
7.  Details View for Selected Element.
8.  Alarms Notification Area.
9.  Events Notification Area.

Figure 1-4: The GUI

Содержание DigiVu II



















































































































Отзывы:

Нет отзывов