ATX DigiVu II Скачать руководство пользователя страница 22

Страница: 22 / 114

CHAPTER 2: GENERAL (GLOBAL) CONFIGURATION

2-6

VersAtive

Pro, DigiVu

II, DigiVu

II Micro – Operation Manual

2.5 Licence

This page is for information only and displays the licence level installed on the platform. Licences may be updated with a

licence file.

2.5.1 Licence Update

The licence on the machine may be updated from a file provided by ATX Networks and this needs to be obtained and stored

on the management computer first.

Procedure

1. In the Tree View, click the

General

icon to select it, Figure 2-14.

2. Click

Licence Update

on the Tool Bar.

3. Click

Browse

to locate the file on the management computer, Figure 2-15.

4. Select the file with the explorer window.
5. Click

Open

6. Click

Upload

•

The licence file is uploaded and updated.

Figure 2-13: Licence Page

Figure 2-14: Licence Update

Figure 2-15: Upload Licence File

Содержание DigiVu II



















































































































Результаты поиска

Содержание DigiVu II

Отзывы:

ATX DigiVu II, Руководство по эксплуатации, Страница: 22 / 114

Результаты поиска

Содержание DigiVu II

Отзывы: