ATX DigiVu II Скачать руководство пользователя страница 111

Страница: 111 / 114

CHAPTER 1: MKIP SYSTEM SHELL

VersAtive

Pro, DigiVu

II, DigiVu

II Micro – Operation Manual

13-15

13.13 Menu - Restart

Shutdown and restart the Device server from this option.

13.14 Menu - Shutdown

Shutdown the Device server from this option. The server will not restart.

13.15 Menu - Authentication Mode

Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides centralized Authentication,

Authorization, and Accounting (AAA) management for users that connect and use a network service. RADIUS was developed

by Livingston Enterprises, Inc. in 1991 as an access server authentication and accounting protocol and later brought into the

Internet Engineering Task Force (IETF) standards. (Wikipedia).

Implementation

RADIUS Authentication is implemented in the GUI (Web and SSH). In this mode the Username and Password of the Web

server will be defined on a RADIUS server. Mkip password for log-in through SSH will be defined also on the remote radius

server. In this mode the Operator must configure, through ‘mkip’, several parameters for identification against the Remote

RADIUS Server.

Local Authentication

GUI current and default mode.
In this mode The User name and the Password are as Usual and hard coded(Both the Apache2 username/password and mkip

password).

Radius Authentication

In this mode the Operator needs to configure the parameters that mentioned above.
After the configuration done:
Web Username and Password are as configured on the Radius server.
Mkip password is as configured on the radius server.

Configurable Parameters

•

Radius Server IP - RADIUS Server port

•

Port number

•

Secret Key - Secret key given by the RADIUS Server

•

Time-Out Interval - Number of seconds trying to access RADIUS server before giving up

•

Cookie-time - Number of minutes for which the cookie exists.

The Operator will need to add 2 Users to his RADIUS server.

1. mkip (the hard coded username) with password - For SSH access – mkip login.
2. Username and Password - For Web authentication.

Figure 1-32:

Configure RADIUS Settings

Содержание DigiVu II



















































































































Результаты поиска

Содержание DigiVu II

Отзывы:

ATX DigiVu II, Руководство по эксплуатации, Страница: 111 / 114

Результаты поиска

Содержание DigiVu II

Отзывы: