ATX DigiVu II Скачать руководство пользователя страница 35

Страница: 35 / 114

CHAPTER 1: ENCODING APPLICATION

VersAtive

Pro, DigiVu

II, DigiVu

II Micro – Operation Manual

4-1

ENCODING APPLICATION

4. Encoding Application

This chapter describes setting up a Source Capture Card to ingest and encode live Analog or SDI video and/or audio for SPTS

and Adaptive encoding applications.

4.1 Chapter Contents

•

“Capture Card Resources”

•

“SPTS Encoding Application”

•

“Adaptive Encoding Application”

•

“Start the Encoding Process”

4.2 Capture Card Resources

A Capture Card Resource is an input to the platform which exists on one of the physical analog card interfaces as analog or

SDI content. These resources are used as source content for subsequent encoding.

4.2.1 Capture Card Audio Options

This section outlines multi-channel mapping options. For content derived from baseband input cards such as HD-SDI and SD-

SDI, embedded audio programs are handled differently depending on the audio port selected when creating a resource so it

is important to make the correct selection since this cannot be changed afterward. If an incorrect selection is made, delete the

resource and re-create it. See the following tables for audio channel processing for each audio port selection.

Note:

Currently, in this firmware release, the 16 embedded channels cannot be fully utilized for

either of the 16 channel selections. It is recommended that only the 8 channel selections be used

for either Dolby Digital 5.1 encoding or for multi-language support.

Note:

Currently, in this firmware release, for ‘Embedded 8 ch’ selection (not ‘Embedded ML 8ch’),

embedded channels 7 and 8 cannot be utilized even if they appear on the input program. For the

‘Embedded 8ch’ selection, it is assumed that the input conforms to the industry recognized standard

channel plan shown in

Table 4.2c

for Dolby Digital 5.1 encoding.

Table 4.2a: Capture Card Audio Port Selection Options

Selection

Audio Channels

Description

Embedded 2ch

2 (single Stereo)

Used to ingest audio that is a single stereo program. With this selection,

there is support for 1 output PID.

Embedded 8ch

6 (single Dolby 5.1)

Used to ingest audio that is a Dolby Digital 5.1 source program with

channels arranged in the industry standard form shown in Table 4.2c. With

this selection, encoder supports 1 output PID which may be configured in

Video & Audio Stream Session/Encoding Session/Advanced, as shown in

Figure 1-26. Only the first 6 embedded channels may be used.

Embedded ML 8ch

8 (up to 4 stereo

Multi-language)

Used to ingest up to 8 audio channels consisting of up to 4 multi-language

stereo programs arranged in pairs; 1+2, 3+4, 5+6, 6+8 and as shown in

Table 4.2b. With this selection there is support for up to 4 output PIDs

which may be configured. Leave blank any PIDs not required.

Embedded 16ch

8 (single Dolby 5.1)

Same as ‘Embedded 8ch’ but 16 channels.

Embedded ML 16ch

8 (up to 4 stereo

Multi-language)

Same as ‘Embedded ML 8ch’ but 16 channels.

Содержание DigiVu II



















































































































Результаты поиска

Содержание DigiVu II

Отзывы:

ATX DigiVu II, Руководство по эксплуатации, Страница: 35 / 114

Результаты поиска

Содержание DigiVu II

Отзывы: