manualshive.com logo in svg

ATX DigiVu II, Руководство по эксплуатации, Страница: 79 / 114

Поделиться
Скачать
ATX DigiVu II Скачать руководство пользователя страница 79

CHAPTER 1: ALARMS & EVENTS

VersAtive

®

Pro, DigiVu

®

 II, DigiVu

®

 II Micro – Operation Manual 

10-1

ALARMS & EVENTS

10.  Alarms & Events

10.1  Alarms

Alarms are current issues that exist with the Device and are not persistent; these are cleared over time as issues are resolved. 

Alarms  are  of  a  minor  nature  and  do  not  affect  or  report  on  the  streaming  operation  of  the  Device  platform. Alarms  are 

presented in the GUI, see Figure 1-1

 and 

Figure 1-2.

1.  Severity - Indication of the severity of the current alarm condition.
2.  State - Reports on the state of the Device platform, either Active (Streaming) or Idle.
3.  Enabled - Reports on the Device. Enabled or Disabled.
4.  Alarms Button - Opens the alarms window for review and deletion of reported alarms.

10.1.1  Reviewing Alarms

Open the Alarms window by clicking the Alarms Button, top right corner of the  GUI, Figure 9-8 (4). The Alarms window opens 

and displays the current alarms, Figure 9-9.

1.  Select the desired action from the actions list. “Clear All Alarms” action will directly delete all alarms with a warning.
2.  Item’s selection boxes become ticked or manually select each item for action.
3.  Review a long list of alarms with the “Previous/Next’” action controls.
4.  Search an alarm condition with criteria. The list is dynamically refreshed with the items matching the entered string. 

Figure 1-1: 

Alarms Notifications - Idle

Figure 1-2: 

Alarms Notifications - Streaming

Figure 1-3: Reviewing  Alarms

Содержание DigiVu II



















































































































Отзывы:

Нет отзывов