ATX DigiVu II, Руководство по эксплуатации, Страница: 110 / 114

CHAPTER 1: MKIP SYSTEM SHELL
13-14 VersAtive
®
Pro, DigiVu
®
II, DigiVu
®
II Micro – Operation Manual
3. In the open dialog shown in Figure 1-29, note the time zone that is currently set. If this time zone is incorrect then
after setting the NTP IP address, you must also set the Time Zone from the menu next.
4. If the time zone was incorrect, select Set Time By NTP again from the menu, Figure 1-27. This time choose Time
Zone , Figure 1-28.
5. Choose the geographic region for the time zone of the Device, Figure 1-30, then click OK .
6. Choose the local region of the Device, Figure 1-31. Click OK .
7. Time will be automatically updated from the defined server.
Figure 1-29: Enter the IP address
Figure 1-30: Chose Geographic Area
Figure 1-31: Choose Local Region