ATV VLDVR Series, Руководство пользователя

Страница: 33 / 78

User’s Manual
26
NOTE: Selecting Use Mobile sets the ATVision service to be enabled automatically regardless of your ATVision
settings.
You can access a remote DVR and monitor live video images using media players, such as VLC Player,
supporting RTSP service. Start the media player on your local PC and enter “rtsp://ID:Password@IP
address:RTSP port number/track ID=‘channel number’”, or start Internet Explorer on your Blackberry
or other mobile devices and enter “http://IP address: ATVision port number/”.
Some media players might play video properly depending on network conditions.
RTSP service might not be supported, depending on the type of media player.
Highlight the
ATVision
tab, and the ATVision screen displays.
Highlight
Use ATVision Service
and press the button
to toggle between On and Off. See Appendix – ATVision for
detailed descriptions of the ATVision service.
Highlight the box beside
Port
and press the button. Set the
port number used when accessing ATVision by using the
Up
and
Down
arrow buttons to increase or decrease the numbers.
Figure 25 — ATVision setup screen.
Notification
The DVR can be set up to send an email or to contact a computer running ATVision (Remote Management Software)
when an event occurs.
Highlight
Notification
in the Network menu and press the button. The
Notification
screen displays. You will be
able to change the Mail and Callback settings.
Figure 26 — Notification Mail setup screen.
Highlight
Enable
and press the button to toggle between
On and Off. You will only be able to change the settings if
Mail is enabled.
Highlight the box beside
SMTP Server
and press the
button. A virtual keyboard appears that you can use to enter
the IP address or domain name of the SMTP server.
NOTE: You will need to get the IP Address or domain
name of the SMTP Server from your network
administrator.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
Highlight the box beside
Port
and press the button. Use the arrow buttons to enter the SMTP Server port number
obtained from your system administrator. The default port number is 25.
Highlight
Use SSL/TLS
and press the button to toggle between On and Off. When it is On, the DVR can send an
email via an SMTP server requiring SSL (Secure Sockets Layer) authentication.
NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).