ATTO Technology FibreBridge 4500C, Инструкция по установке и эксплуатации

Страница: 31 / 65

24
Diagn
o
stic comm
ands
ErrorLog
Set form clears ErrorLog since previous error reported. Get form shows error messages since the report was last cleared.
Actions: set ErrorLog clear Information: get ErrorLog
Returns: Error Logs cleared Returns: The last error code save was xx
An error of type xxx was detected since last error log clearing
Specific error text.
FcPortList
Returns a list of available Fibre Channel ports and their current status.
Limits: valid status values are OK and Failed
Actions: none Information: FcPortList
Returns: [line count] [fp] [status]
FcSCSIBusyStatus
Specifies the SCSI status value returned when the FibreBridge is unable to accept a SCSI command because of a temporary lack of resources.
Limits: [busy | qfull] Default: busy
Actions: set FcSCSIBusyStatus [busy | qfull] I nformation: get FcSCSIBusyStatus
SaveConfiguration
FcTargets
Obtains information about every Fibre Channel target device visible to a FibreBridge operating in initiator mode; devices may be used as targets
for initiator mode features such as Extended Copy.
Actions: none Information: FcTargets
Returns: Node Name, FC LUN & inquiry data for each FC device found
FcWWName
Reports the Word Wide Name (WWN) of the Fibre Channel interface. Each FC port has an individual and unique WWN. The least significant 6
bits of the WWN are used as the Ethernet MAC address.
Limits: Fabric and loop operations are unpredictable if duplicate WWNs are assigned.
Actions: none Information: get FcWWN [PortNumber]
Return: Port n FcWWName= 20 00 00 10 86 nn nn nn
FibreBridgeModel
Reports model information about a specific FibreBridge
Action: none Information: get FibreBridgeModel
Returns:
FibreBridge 4500
2002 ATTO Technology, Incorporated
Firmware version mm..mm release date mm.dd.yyyy, hh:mm:ss
Build zzzz
FibreBridgeName
Specifies the eight-character name assigned by you to the FibreBridge used to identify individual FibreBridge units. It is not the World Wide Name
(WWN). The name is padded with spaces to the maximum of eight characters.
Actions: set FibreBridge Name [value] Information: get FibreBridgeName
SaveConfiguration
Help
Displays a list of available commands. If command name is specified, displays detailed command-specific information.
Action: none Information: Help [command name]
IdentifyFibreBridge
Enabling this option causes the Ready LED on the front panel of the FibreBridge to blink until the parameter is disabled.
Actions: set IdentifyFibreBridge [enabled|disabled] Information: get IdentifyFibreBridge
SaveConfiguration