ATTO Technology FibreBridge 4500C, Инструкция по установке и эксплуатации

Страница: 29 / 65

22
4.1.1 General use commands
The CLI commands outlined in this chapter get information or perform functions which are used in a
variety of situations with the FibreBridge.
Help
Displays a list of available commands. If command name is specified, displays detailed command-specific information.
Action: none Information: Help [command name]
Menu
Turns the menu interface on or off. If the interface is on, other parameters such as ECHO will also be enabled.
Action: none Information: Menu
RestoreConfiguration
Restores configuration to either the default configuration or the configuration last saved into non-volatile memory. The saved
option will undo any changes made since the last save.
Actions: RestoreConfiguration [Default | Saved] Information: none
SaveConfiguration
Many commands require a SaveConfiguration command to be executed. This will be indicated by the return Ready. *. When you
invoke SaveConfiguration, the current configuration is permanently saved in the FibreBridge and the new configuration becomes
the active configuration. If a firmware restart is required to make the requested change permanent, you will see a prompt asking
you to confirm the restart. You can override this request by indicating the override value on the command line. You may make
several changes through commands and SaveConfiguration before implementing the restart, but once you have restarted the
FibreBridge, all the command changes created before the restart and save will be implemented. If you select the restart option, the
FibreBridge will execute its complete start up cycle.
Limits: Restart or no Restart parameter is optional
Actions: SaveConfiguration <Restart| NoRestart> Information: none
Returns: [Configuration saved |
Restart is necessary...
Do you wish to restart (y/n)? y
Restarting...]
SerialNumber
Reports the FibreBridge serial number which is unique for each FibreBridge. The serial number tracks the board throughout its
life and should not be changed for any reason.
Limits: set form requires operator privileges
Actions: set SerialNumber Information: get SerialNumber
Verbose return:
Part Identifier: PPPPPPP Sequence Number: nnnnnn
VerboseMode
Specifies the detail of feedback for the command line interface. Disabling this option removes parameter names from action
commands and removes descriptions from information commands.
Limits: enabled or disabled Default: enabled (returns have parameter information)
Actions: set VerboseMode [enabled | disabled] Information: get VerboseMode