ATTACK DPX15, Инструкция по эксплуатации, Страница: 32 / 60

32
The „
←
“ button is used to exit from menu and then is the display automatically switched to the
operating mode. If no button is pressed for 30 minutes, the display automatically is switched to
the operating mode automatically.
If any fault occurs or the temperature rises extremely, the options menu closes automatically.
4.12 INFORMATION DISPLAYED:
Menu Submenu Indication
Information
Boiler set
°C
--
Indicates the adjusted temperature value in the boiler
Boiler temperature
°C
---.-
Current value. Indicates the current boiler temperature.
Flue gas set
°C
---.-
Indicates the adjusted flue gas temperature
Flue gas temperature
°C
---.-
Indicates the current flue gas temperature
O
2
set
% --.-
Indicates the adjusted oxygen value in the flue gas.
O
2
% --.-
Indicates the current oxygen value in the flue gas.
CO
2
set
% --.-
Indicates the adjusted value of the CO
2
in the flue gas
CO
2
% --.-
Indicates the current value of the CO
2
Note: The fix value of the CO
2
for calculation is max. 20,3 %.
Suction fan
ON/OFF
Operating state of the fan
Circuit pump
ON/OFF
Operating state of the pump
Primary motor
% --.-
Position of the primary air flap
Secondary motor
% --.-
Position of the secondary air flap
Lambda
--.- Ratio of air (current value) Note: The fix value of the CO
2
for
calculation is max. 20,3 %.
Efficiency
ETA – F (%)
--.-
Grade of efficiency of burning – current value
Temperature of air for burning (35 °C) is used for calculation
Total temperature excess (%)
--.- Total ratio of the temperature excess (%) during the total time of
burning (total of the operating hours)
Temperature excess –
10 loadings (%)
--.-
Ratio of the excessive temperature in (%) by the last 10 loadings.
Operating hours
H --.- Operating hours of the boiler. After 60 000 hours is the counter
deleted.
Software
--.--
Program version nr.
Serial number
---------
Serial or production number of the regulator.
Test of
device
Safety test
Setting
END