ATS R4520C, Руководство пользователя

Страница: 31 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 31
2.7 Ext Data
This optional feature is used when you want to dump data out hourly through a serial port to another device. This
screen is used to select the type of device you want to dump to. For this feature to be activated it will need to have
been selected for in screen 6 of the Stationary Setup.
Screen1
Enter a 1 or 2 for the type of device and press
“ENTER”.
2.7.1 RDP – Remote Data Platform
With this setting selected all the data collected during the hour will be dumped out the
PC/CLONE serial port as
binary compressed data.
Screen
2
9600 : Sets the serial communication settings for the R4520C’s data output to
“baud: 9600, no parity, 8 data bits, 1 stop bit”.
57600: Sets the serial communication settings for the R4520C’s data output to
“baud: 57600, no parity, 8 data bits, 1 stop bit”.
Enter a 1 or 2 for the desired serial port settings and press “
ENTER ”. The screen will return to the “Setup Menu”
2.7.2 Goes – Geostationary Operational Environmental Satellites
With this setting selected, limited amounts of data collected during the hour will be dumped out the
PC/CLONE and
AUX serial ports as binary compressed data.
The GOES functionality enables the receiver to send data to a geostationary satellite so that the user can retrieve it
later from another location. This system has the advantage of working in remote locations not typically covered by
standard cell phone service providers.
To use GOES you first need an account with NESDIS (National Environmental Satellite, Data and Information
Service). You also need a GOES Transmitter. Both the SAT HDR GOES and TX312 models sold by Campbell
Scientific, Inc are compatible with the data protocol being sent out the
AUX serial port. The data coming out the
PC/CLONE port is standard RS232 with settings: “baud: 9600, no parity, 8 data bits, 1 stop bit”.