ATS R4520C, Руководство пользователя

Страница: 18 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 18
2.1.3 Backlight
Move the cursor to the
Backlight item and press “ENTER” . This will turn the backlight on or off depending on its
current state.
2.1.4 Memory
Move the cursor to the Memory item and press “ENTER” . The “Memory Menu” is used to view the amount of data
storage you have left, look at your stored data and reset your data pointer.
This is the view of the “Memory Menu”
2.1.4.1 Memory Remaining
Move the cursor to the Memory Remaining item and press “ENTER” . This screen displays the number of data
blocks the R4520C can still write before the memory is full. It list two numbers, one for Aerial data and one for
Stationary data. The number of Aerial data blocks will always be half as much as the number of Stationary data
blocks. The maximum number of data blocks available for storage is shown below.
2.1.4.2 View Memory
Move the cursor to the View Memory item and press “ENTER” . This series of screens allows you to view all your
previously stored data block by block. The format of the data to be viewed will depend on the selected “TX Type”
and whether it was Aerial or Stationary Logging.