ATS R4520C, Руководство пользователя

Страница: 24 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 24
To access functions available to this mode press a “ SHIFT ” key and a “ ONE” , “ ALL” ,
“ NONE” , “ VIEW ” , “ VIEW ” , “ MERGE” , “ ADDFR” , “ DELFR”
, or “ RECORD” key.
GPS:
This flashing message will indicate the status of the GPS functionality. GPS data will only be stored
if an optional antenna is connected to the receiver, the GPS functionality is turned on and a valid
GPS fix has been acquired.
ID’s: When a transmitter is identified, the ID will appear in the display. The screen has only enough
room to display 9 ID’s. If more than 9 ID’s are detected, there will be a “+” indicator in the bottom
right hand corner of the display. To view the other ID’s use the VIEW and the VIEW
as scroll keys. Shown in Example 1 is the first page of the detected tag ID list. The most
recently detected ID will appear in the upper left hand corner of the display. Note that the first two
lines of IDs have no “+” indicator on the right hand side. Example 2 shows all three lines with a “+”
indicator. This shows that the list can scroll both up and down. The absence of any IDs in the
bottom row indicates that scrolling down will not show any more detected IDs. A “
...............+ ” on
the display indicates you’ve reached the end of the list’s storage area. All detected IDs will be
stored to memory for downloading to the PC. The ID will be shown on the screen as a three digit
number followed by its mortality indicator and its signal strength reading. The first two digits are
the tag ID. The third digit is a counter that will increment every time the tag ID is identified. This
counter will loop from 0-9. (For example: 127 = ID number 12, and has been detected 7 times.) If a
tag is in mortality mode the ID information will show an ‘M’ where a ‘-‘ would normally appear.
To stop the Aerial Scan, press
“ESC” . This will return the screen to the “Main Menu”
If you desire to start the aerial scan after stopping the scan, a new window will appear when entering the “Aerial
Menu”.
Screen 1:
Pressing
“ENTER” while the cursor is on Resume Last Scan , the following screen will come up:
Screen 2: