ATS R4520C, Руководство пользователя

Страница: 14 / 61

Advanced Telemetry Systems, Inc. R4520C Reference User Manual R05-11A 14
To change the numeric value, use the numeric digits on the keypad, or you can use the and keys to
increment the numeric value, up or down. For the R4520C to accept a value, press “ENTER” . After the Minutes
have been entered, the menu will return to the “Setup Menu”. If no changes are needed in the “Clock Menu”,
pressing “
ESC ” will return you to the “Setup Menu”
2.1.2 Defaults
Move the cursor to the Defaults item and press “ENTER” . There will be a number of different screens to go
through depending on your screen selections. Pressing “ ESC ” will bring you back to the previous screen.
2.1.2.1 Aerial Defaults
Move the cursor to the Aerial Defaults item and press “ENTER” . This menu option sets the default options for
aerial tracking, setting the defaults in this option helps reduce unwanted changes or mistakes in having to set the
parameters during the tracking survey.
Screen
1
Table #:
Selects the frequency table used for scanning. Twelve tables are available.
Multiple tables are used to optimize Aerial surveys in multiple locations.
Scan Rate:
Sets the amount of time the R4520C will stop on each frequency while attempting
to detect tags. The number after the decimal point may be a 0 or a 5 to allow half
second increments.
Time Out:
The amount of time the receiver will stay on a Frequency while attempting to
detect a tag. If no tag is detected in the Time Out period, the receiver will advance
to the next frequency in its frequency table. This feature allows faster scanning by
truncating the scan time if no tag is detected in the Time Out period. The user
defines the parameter (e.g. 003 – 300 seconds). Refer to section
14.0 for
information on setting the Time Out value.