Atrust T180L Скачать руководство пользователя страница 99

Страница: 99 / 236

Configuring Client Settings

Configuring External Device Settings

4.4.8 Adding a Network Printer

To add a network printer for your t180L/t180LB, please do the following:

1. Ensure that your t180L/t180LB is connected to the network and the desired network printer is turned on.
2. On Atrust Client Setup, click

Devices

Printer

3. Click

Add

on the top of the Printer list.

4. The system automatically starts searching for available local printers. Upon completion, the discovered local

printers will be listed on the Printer Port drop-down menu.

5. Click the Printer Port drop-down menu to select the desired network printer. Three types of network printers

are available:

TCP Network Printer

LPD Network Printer

, and

IPP Network Printer

6. Fields in the Add Printer section will automatically change to fit the type of the selected printer.
7. Type in the IP address of the network printer in the TCP Printer Server, LPD Printer Server, or IPP URI field.

8. Click the Manufacturer and Printer Model drop-down menus to select the manufacturer and model for the

desired network printer.

9. Refer to the table on page 88 to configure other printer settings, and then click

Save

to apply.

Содержание T180L












































































































































































































































Результаты поиска

Содержание T180L

Отзывы:

Atrust T180L, Руководство пользователя, Страница: 99 / 236

Результаты поиска

Содержание T180L

Отзывы: