Atrust T180L Скачать руководство пользователя страница 97

Страница: 97 / 236

Configuring Client Settings

Configuring External Device Settings

8. A field for the selected printer appears and the printer URI (Uniform Resource Identifier) data is automatically

filled out in the field.

NOTE

•

A URI (Uniform Resource Identifier) is a sequence of characters that is used to

identify a resource on the Internet.

9. Click the Manufacturer and Printer Model drop-down menus to select the manufacturer and model for the

attached local printer.

NOTE

•

For the printer to operate normally, you need to specify the correct information in

these two menus. Otherwise, the printer would fail to work.

10. Refer to the following table to configure desired settings.

NOTE

•

You may need to provide the Windows driver name for your printer. For details,

please refer to descriptions in the table.

11. Type the desired printer name, and then click

Save

to apply.

Содержание T180L












































































































































































































































Результаты поиска

Содержание T180L

Отзывы:

Atrust T180L, Руководство пользователя, Страница: 97 / 236

Результаты поиска

Содержание T180L

Отзывы: